Programming the Vortex Orbit Written Guide
User Guide
Power on with the mechanical switch.
| Controls |
Outside button |
Inside button |
| Short Press |
Next option/slot |
Previous option/slot |
| Medium Press |
Confirm and Exit |
Cancle and Exit |
| Long Press/Hold |
Open menus |
Open menus |
- Hold the button to enter various menus, the longer you hold the deeper into the menu list you go.
- While holding, the LEDs will fill with a color one by one to indicate a menu.
- Release while the menu color is displayed to select that menu.
This is the menu reference guide:
|
Randomizer
(White)
|
- Automatically starts the auto-randomizer.
- It will re-randomize every few seconds.
- Press the outside button to save and exit.
- Press the inside button to cancle and exit.
|
|
Color Select Menu
(Orange)
|
- Each lit pixel represents a single color from this set.
- Edit each slot individually.
- Medium press the outside button to select a slot.
- Medium press the inside button to exit.
|
Pattern Select Menu
(Blue)
|
- The full list of available patterns.
- Medium press the outside button to save the current pattern.
- Mediuim press the inside button to cancle and exit.
|
Global Brightness Menu
(Yellow)
|
- Select one of 4 global brightness settings.
- This affects all mode slots at once.
- Saved Colors are independant of global brighness.
- Medium press the outside button to save and exit.
- Mediuim press the inside button to cancle and exit.
|
|
|
- Restores all modes to factory settings
- These are the same settings you get out of the box!
- Medium press the outside button while on bright red to factory reset.
- Mediuim press the inside button to cancle and exit.
|
|
|
- Send or Receive modes on this mode slot.
- Rapid flashing is Send.
- Slow blink is Receive.
- Medium press exits this menu
|
